Uma chave de API é necessária para que as solicitações sejam processadas pelo sistema. Depois que um usuário se registra, uma chave de API é gerada automaticamente para esse usuário. A chave de API deve ser enviada com cada solicitação (veja o exemplo completo abaixo). Se a chave de API não for enviada ou expirada, haverá um erro. Certifique-se de manter sua chave de API em segredo para evitar abusos.
Para autenticar com o sistema de API, você precisa enviar sua chave de API como um token de autorização a cada solicitação. Você pode ver o código de exemplo abaixo.
curl --location --request POST 'https://linkerfit.com/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/url/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/account',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: ''
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
Nossa API possui um limitador de taxa para proteção contra picos de solicitações para maximizar sua estabilidade. Atualmente, nosso limitador de taxa está limitado a 30 solicitações por 1 minuto.
Vários cabeçalhos serão enviados junto com a resposta e estes podem ser examinados para determinar várias informações sobre a solicitação.
X-RateLimit-Limit: 30
X-RateLimit-Remaining: 29
X-RateLimit-Reset: TIMESTAMP
Todas as respostas da API são retornadas no formato JSON por padrão. Para converter isso em dados utilizáveis, a função apropriada precisará ser usada de acordo com o idioma. No PHP, a função json_decode() pode ser usada para converter os dados em um objeto (padrão) ou uma matriz (defina o segundo parâmetro como verdadeiro). É muito importante verificar a chave de erro, pois ela fornece informações sobre se houve um erro ou não. Você também pode verificar o código do cabeçalho.
{
"error": 1,
"message": "An error ocurred"
}
https://linkerfit.com/api/overlay?limit=2&page=1
To get cta overlays via the API, you can use this endpoint. You can also filter data (See table for more info).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://linkerfit.com/api/overlay?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/overlay?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/overlay?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"cta": [
{
"id": 1,
"type": "message",
"name": "Product 1 Promo",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"type": "contact",
"name": "Contact Page",
"date": "2020-11-10 18:10:00"
}
]
}
}
https://linkerfit.com/api/campaigns?limit=2&page=1
To get your campaigns via the API, you can use this endpoint. You can also filter data (See table for more info).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://linkerfit.com/api/campaigns?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/campaigns?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/campaigns?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"campaigns": [
{
"id": 1,
"name": "Sample Campaign",
"public": false,
"rotator": false,
"list": "https:\/\/domain.com\/u\/admin\/list-1"
},
{
"id": 2,
"domain": "Facebook Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/test",
"list": "https:\/\/domain.com\/u\/admin\/test-2"
}
]
}
}
https://linkerfit.com/api/campaign/add
A campaign can be added using this endpoint.
Parâmetro | Descrição |
---|---|
name | (optional) Campaign name |
slug | (optional) Rotator Slug |
public | (optional) Access |
curl --location --request POST 'https://linkerfit.com/api/campaign/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/campaign/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'New Campaign',
'slug' => 'new-campaign',
'public' => true,
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/campaign/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "New Campaign",
"slug": "new-campaign",
"public": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 3,
"domain": "New Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/new-campaign",
"list": "https:\/\/domain.com\/u\/admin\/new-campaign-3"
}
https://linkerfit.com/api/campaign/:campaignid/assign/:linkid
A short link can be assigned to a campaign using this endpoint. The endpoint requires the campaign ID and the short link ID.
curl --location --request POST 'https://linkerfit.com/api/campaign/:campaignid/assign/:linkid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/campaign/:campaignid/assign/:linkid",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/campaign/:campaignid/assign/:linkid',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Link successfully added to the campaign."
}
https://linkerfit.com/api/campaign/:id/update
To update a campaign, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Parâmetro | Descrição |
---|---|
name | (required) Campaign name |
slug | (optional) Rotator Slug |
public | (optional) Access |
curl --location --request PUT 'https://linkerfit.com/api/campaign/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/campaign/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'Twitter Campaign',
'slug' => 'twitter-campaign',
'public' => true,
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkerfit.com/api/campaign/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "Twitter Campaign",
"slug": "twitter-campaign",
"public": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 3,
"domain": "Twitter Campaign",
"public": true,
"rotator": "https:\/\/domain.com\/r\/twitter-campaign",
"list": "https:\/\/domain.com\/u\/admin\/twitter-campaign-3"
}
https://linkerfit.com/api/campaign/:id/delete
To delete a campaign, you need to send a DELETE request.
curl --location --request DELETE 'https://linkerfit.com/api/campaign/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/campaign/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkerfit.com/api/campaign/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Campaign has been deleted successfully."
}
https://linkerfit.com/api/channels?limit=2&page=1
To get your channels via the API, you can use this endpoint. You can also filter data (See table for more info).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://linkerfit.com/api/channels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/channels?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/channels?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"channels": [
{
"id": 1,
"name": "Channel 1",
"description": "Description of channel 1",
"color": "#000000",
"starred": true
},
{
"id": 2,
"name": "Channel 2",
"description": "Description of channel 2",
"color": "#FF0000",
"starred": false
}
]
}
}
https://linkerfit.com/api/channel/:id?limit=1&page=1
To get items in a select channels via the API, you can use this endpoint. You can also filter data (See table for more info).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://linkerfit.com/api/channel/:id?limit=1&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/channel/:id?limit=1&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/channel/:id?limit=1&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"items": [
{
"type": "links",
"id": 1,
"title": "My Sample Link",
"preview": "https:\/\/google.com",
"link": "https:\/\/linkerfit.com\/google",
"date": "2022-05-12"
},
{
"type": "bio",
"id": 1,
"title": "My Sample Bio",
"preview": "https:\/\/linkerfit.com\/mybio",
"link": "https:\/\/linkerfit.com\/mybio",
"date": "2022-06-01"
}
]
}
}
https://linkerfit.com/api/channel/add
A channel can be added using this endpoint.
Parâmetro | Descrição |
---|---|
name | (required) Channel name |
description | (optional) Channel description |
color | (optional) Channel badge color (HEX) |
starred | (optional) Star the channel or not (true or false) |
curl --location --request POST 'https://linkerfit.com/api/channel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/channel/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'New Channel',
'description' => 'my new channel',
'color' => '#000000',
'starred' => true,
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/channel/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 3,
"name": "New Channel",
"description": "my new channel",
"color": "#000000",
"starred": true
}
https://linkerfit.com/api/channel/:channelid/assign/:type/:itemid
An item can be assigned to any channel by sending a request with the channel id, item type (links, bio or qr) and item id.
Parâmetro | Descrição |
---|---|
:channelid | (required) Channel ID |
:type | (required) links or bio or qr |
:itemid | (required) Item ID |
curl --location --request POST 'https://linkerfit.com/api/channel/:channelid/assign/:type/:itemid' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/channel/:channelid/assign/:type/:itemid",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/channel/:channelid/assign/:type/:itemid',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Item successfully added to the channel."
}
https://linkerfit.com/api/channel/:id/update
To update a channel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Parâmetro | Descrição |
---|---|
name | (optional) Channel name |
description | (optional) Channel description |
color | (optional) Channel badge color (HEX) |
starred | (optional) Star the channel or not (true or false) |
curl --location --request PUT 'https://linkerfit.com/api/channel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/channel/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'Acme Corp',
'description' => 'channel for items for Acme Corp',
'color' => '#FFFFFF',
'starred' => false,
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkerfit.com/api/channel/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "Acme Corp",
"description": "channel for items for Acme Corp",
"color": "#FFFFFF",
"starred": false
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Channel has been updated successfully."
}
https://linkerfit.com/api/channel/:id/delete
To delete a channel, you need to send a DELETE request. All items will be unassigned as well.
curl --location --request DELETE 'https://linkerfit.com/api/channel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/channel/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkerfit.com/api/channel/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Channel has been deleted successfully."
}
https://linkerfit.com/api/account
Para obter informações sobre a conta, você pode enviar uma solicitação para esse endpoint e ele retornará os dados da conta.
curl --location --request GET 'https://linkerfit.com/api/account' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/account",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/account',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"data": {
"id": 1,
"email": "[email protected]",
"username": "sampleuser",
"avatar": "https:\/\/domain.com\/content\/avatar.png",
"status": "pro",
"expires": "2022-11-15 15:00:00",
"registered": "2020-11-10 18:01:43"
}
}
https://linkerfit.com/api/account/update
Para atualizar as informações da conta, você pode enviar uma solicitação para esse endpoint e ele atualizará os dados da conta.
curl --location --request PUT 'https://linkerfit.com/api/account/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"email": "[email protected]",
"password": "newpassword"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/account/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'email' => '[email protected]',
'password' => 'newpassword',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkerfit.com/api/account/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"email": "[email protected]",
"password": "newpassword"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Account has been successfully updated."
}
https://linkerfit.com/api/qr?limit=2&page=1
Para obter seus códigos QR por meio da API, você pode usar este endpoint. Você também pode filtrar os dados (consulte a tabela para obter mais informações).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://linkerfit.com/api/qr?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/qr?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/qr?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"qrs": [
{
"id": 2,
"link": "https:\/\/linkerfit.com\/qr\/a2d5e",
"scans": 0,
"name": "Google",
"date": "2020-11-10 18:01:43"
},
{
"id": 1,
"link": "https:\/\/linkerfit.com\/qr\/b9edfe",
"scans": 5,
"name": "Google Canada",
"date": "2020-11-10 18:00:25"
}
]
}
}
https://linkerfit.com/api/qr/:id
Para obter detalhes de um único código QR por meio da API, você pode usar este endpoint.
curl --location --request GET 'https://linkerfit.com/api/qr/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/qr/:id",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/qr/:id',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"details": {
"id": 1,
"link": "https:\/\/linkerfit.com\/qr\/b9edfe",
"scans": 5,
"name": "Google Canada",
"date": "2020-11-10 18:00:25"
},
"data": {
"clicks": 1,
"uniqueClicks": 1,
"topCountries": {
"Unknown": "1"
},
"topReferrers": {
"Direct, email and other": "1"
},
"topBrowsers": {
"Chrome": "1"
},
"topOs": {
"Windows 10": "1"
},
"socialCount": {
"facebook": 0,
"twitter": 0,
"instagram": 0
}
}
}
https://linkerfit.com/api/qr/add
To create a QR Code, you need to send a valid data in JSON via a POST request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Parâmetro | Descrição |
---|---|
type | (required) text | vcard | link | email | phone | sms | wifi |
data | (required) Data to be embedded inside the QR code. The data can be string or array depending on the type |
background | (optional) RGB color e.g. rgb(255,255,255) |
foreground | (optional) RGB color e.g. rgb(0,0,0) |
logo | (optional) Path to the logo either png or jpg |
curl --location --request POST 'https://linkerfit.com/api/qr/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/qr/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'type' => 'link',
'data' => 'https://google.com',
'background' => 'rgb(255,255,255)',
'foreground' => 'rgb(0,0,0)',
'logo' => 'https://site.com/logo.png',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/qr/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 3,
"link": "https:\/\/linkerfit.com\/qr\/a58f79"
}
https://linkerfit.com/api/qr/:id/update
Para atualizar um QR Code, você precisa enviar um dado válido em JSON por meio de uma solicitação PUT. Os dados devem ser enviados como o corpo bruto de sua solicitação, conforme mostrado abaixo. O exemplo abaixo mostra todos os parâmetros que você pode enviar, mas não é necessário enviar todos (consulte a tabela para obter mais informações).
Parâmetro | Descrição |
---|---|
data | (required) Data to be embedded inside the QR code. The data can be string or array depending on the type |
background | (optional) RGB color e.g. rgb(255,255,255) |
foreground | (optional) RGB color e.g. rgb(0,0,0) |
logo | (optional) Path to the logo either png or jpg |
curl --location --request PUT 'https://linkerfit.com/api/qr/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/qr/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'type' => 'link',
'data' => 'https://google.com',
'background' => 'rgb(255,255,255)',
'foreground' => 'rgb(0,0,0)',
'logo' => 'https://site.com/logo.png',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkerfit.com/api/qr/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "link",
"data": "https:\/\/google.com",
"background": "rgb(255,255,255)",
"foreground": "rgb(0,0,0)",
"logo": "https:\/\/site.com\/logo.png"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "QR has been updated successfully."
}
https://linkerfit.com/api/qr/:id/delete
Para excluir um código QR, você precisa enviar uma solicitação DELETE.
curl --location --request DELETE 'https://linkerfit.com/api/qr/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/qr/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkerfit.com/api/qr/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "QR Code has been deleted successfully."
}
https://linkerfit.com/api/urls?limit=2&page=1&order=date
Para obter seus links por meio da API, você pode usar este endpoint. Você também pode filtrar os dados (consulte a tabela para obter mais informações).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
order | (optional) Sort data between date or click |
short | (optional) Search using the short url. Note that when you use the short parameter, all other parameters are ignored and if there is a match a Single Link response will be returned. |
q | (optional) Search for links using a keyword |
curl --location --request GET 'https://linkerfit.com/api/urls?limit=2&page=1&order=date' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/urls?limit=2&page=1&order=date",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/urls?limit=2&page=1&order=date',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"urls": [
{
"id": 2,
"alias": "google",
"shorturl": "https:\/\/linkerfit.com\/google",
"longurl": "https:\/\/google.com",
"clicks": 0,
"title": "Google",
"description": "",
"date": "2020-11-10 18:01:43"
},
{
"id": 1,
"alias": "googlecanada",
"shorturl": "https:\/\/linkerfit.com\/googlecanada",
"longurl": "https:\/\/google.ca",
"clicks": 0,
"title": "Google Canada",
"description": "",
"date": "2020-11-10 18:00:25"
}
]
}
}
https://linkerfit.com/api/url/:id
Para obter detalhes de um único link por meio da API, você pode usar esse ponto de extremidade.
curl --location --request GET 'https://linkerfit.com/api/url/:id' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/url/:id",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/url/:id',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 1,
"details": {
"id": 1,
"shorturl": "https:\/\/linkerfit.com\/googlecanada",
"longurl": "https:\/\/google.com",
"title": "Google",
"description": "",
"location": {
"canada": "https:\/\/google.ca",
"united states": "https:\/\/google.us"
},
"device": {
"iphone": "https:\/\/google.com",
"android": "https:\/\/google.com"
},
"expiry": null,
"date": "2020-11-10 18:01:43"
},
"data": {
"clicks": 0,
"uniqueClicks": 0,
"topCountries": 0,
"topReferrers": 0,
"topBrowsers": 0,
"topOs": 0,
"socialCount": {
"facebook": 0,
"twitter": 0,
"google": 0
}
}
}
https://linkerfit.com/api/url/add
Para encurtar um link, você precisa enviar dados válidos em JSON por meio de uma solicitação POST. Os dados devem ser enviados como o corpo bruto de sua solicitação, conforme mostrado abaixo. O exemplo abaixo mostra todos os parâmetros que você pode enviar, mas não é necessário enviar todos (consulte a tabela para obter mais informações).
Parâmetro | Descrição |
---|---|
url | (required) Long URL to shorten. |
custom | (optional) Custom alias instead of random alias. |
type | (optional) Redirection type [direct, frame, splash], only id for custom splash page or overlay-id for cta pages |
password | (optional) Password protection |
domain | (optional) Custom Domain |
expiry | (optional) Expiration for the link example 2021-09-28 23:11:16 |
geotarget | (optional) Geo targeting data |
devicetarget | (optional) Device targeting data |
languagetarget | (optional) Language targeting data |
metatitle | (optional) Meta title |
metadescription | (optional) Meta description |
metaimage | (optional) Link to a jpg or png image |
description | (optional) Note or description |
pixels | (optional) Array of pixel ids |
channel | (optional) Channel ID |
campaign | (optional) Campaign ID |
deeplink | (optional) Object containing app store links. When using this, it is important to set device targeting as well. (New) You can now set the parameter "auto" to true to automatically generate the deep links from provided long link. |
status | (optional) public or private (default) |
curl --location --request POST 'https://linkerfit.com/api/url/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/url/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'url' => 'https://google.com',
'status' => 'private',
'custom' => 'google',
'password' => 'mypass',
'expiry' => '2020-11-11 12:00:00',
'type' => 'splash',
'metatitle' => 'Not Google',
'metadescription' => 'Not Google description',
'metaimage' => 'https://www.mozilla.org/media/protocol/img/logos/firefox/browser/og.4ad05d4125a5.png',
'description' => 'For facebook',
'pixels' =>
array (
0 => 1,
1 => 2,
2 => 3,
3 => 4,
),
'channel' => 1,
'campaign' => 1,
'deeplink' =>
array (
'auto' => true,
'apple' => 'https://apps.apple.com/us/app/google/id284815942',
'google' => 'https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US',
),
'geotarget' =>
array (
0 =>
array (
'location' => 'Canada',
'link' => 'https://google.ca',
),
1 =>
array (
'location' => 'United States',
'link' => 'https://google.us',
),
),
'devicetarget' =>
array (
0 =>
array (
'device' => 'iPhone',
'link' => 'https://google.com',
),
1 =>
array (
'device' => 'Android',
'link' => 'https://google.com',
),
),
'languagetarget' =>
array (
0 =>
array (
'language' => 'en',
'link' => 'https://google.com',
),
1 =>
array (
'language' => 'fr',
'link' => 'https://google.ca',
),
),
'parameters' =>
array (
0 =>
array (
'name' => 'aff',
'value' => '3',
),
1 =>
array (
'device' => 'gtm_source',
'link' => 'api',
),
),
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/url/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"url": "https:\/\/google.com",
"status": "private",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"metatitle": "Not Google",
"metadescription": "Not Google description",
"metaimage": "https:\/\/www.mozilla.org\/media\/protocol\/img\/logos\/firefox\/browser\/og.4ad05d4125a5.png",
"description": "For facebook",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"campaign": 1,
"deeplink": {
"auto": true,
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"languagetarget": [
{
"language": "en",
"link": "https:\/\/google.com"
},
{
"language": "fr",
"link": "https:\/\/google.ca"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 3,
"shorturl": "https:\/\/linkerfit.com\/google"
}
https://linkerfit.com/api/url/:id/update
Para atualizar um link, você precisa enviar um dado válido em JSON por meio de uma solicitação PUT. Os dados devem ser enviados como o corpo bruto de sua solicitação, conforme mostrado abaixo. O exemplo abaixo mostra todos os parâmetros que você pode enviar, mas não é necessário enviar todos (consulte a tabela para obter mais informações).
Parâmetro | Descrição |
---|---|
url | (required) Long URL to shorten. |
custom | (optional) Custom alias instead of random alias. |
type | (optional) Redirection type [direct, frame, splash] |
password | (optional) Password protection |
domain | (optional) Custom Domain |
expiry | (optional) Expiration for the link example 2021-09-28 23:11:16 |
geotarget | (optional) Geo targeting data |
devicetarget | (optional) Device targeting data |
languagetarget | (optional) Language targeting data |
metatitle | (optional) Meta title |
metadescription | (optional) Meta description |
metaimage | (optional) Link to a jpg or png image |
pixels | (optional) Array of pixel ids |
channel | (optional) Channel ID |
campaign | (optional) Campaign ID |
deeplink | (optional) Object containing app store links. When using this, it is important to set device targeting as well. |
curl --location --request PUT 'https://linkerfit.com/api/url/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/url/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'url' => 'https://google.com',
'custom' => 'google',
'password' => 'mypass',
'expiry' => '2020-11-11 12:00:00',
'type' => 'splash',
'pixels' =>
array (
0 => 1,
1 => 2,
2 => 3,
3 => 4,
),
'channel' => 1,
'deeplink' =>
array (
'apple' => 'https://apps.apple.com/us/app/google/id284815942',
'google' => 'https://play.google.com/store/apps/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US',
),
'geotarget' =>
array (
0 =>
array (
'location' => 'Canada',
'link' => 'https://google.ca',
),
1 =>
array (
'location' => 'United States',
'link' => 'https://google.us',
),
),
'devicetarget' =>
array (
0 =>
array (
'device' => 'iPhone',
'link' => 'https://google.com',
),
1 =>
array (
'device' => 'Android',
'link' => 'https://google.com',
),
),
'parameters' =>
array (
0 =>
array (
'name' => 'aff',
'value' => '3',
),
1 =>
array (
'device' => 'gtm_source',
'link' => 'api',
),
),
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkerfit.com/api/url/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"url": "https:\/\/google.com",
"custom": "google",
"password": "mypass",
"expiry": "2020-11-11 12:00:00",
"type": "splash",
"pixels": [
1,
2,
3,
4
],
"channel": 1,
"deeplink": {
"apple": "https:\/\/apps.apple.com\/us\/app\/google\/id284815942",
"google": "https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.googlequicksearchbox&hl=en_CA&gl=US"
},
"geotarget": [
{
"location": "Canada",
"link": "https:\/\/google.ca"
},
{
"location": "United States",
"link": "https:\/\/google.us"
}
],
"devicetarget": [
{
"device": "iPhone",
"link": "https:\/\/google.com"
},
{
"device": "Android",
"link": "https:\/\/google.com"
}
],
"parameters": [
{
"name": "aff",
"value": "3"
},
{
"device": "gtm_source",
"link": "api"
}
]
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 3,
"short": "https:\/\/linkerfit.com\/google"
}
https://linkerfit.com/api/url/:id/delete
Para excluir um link, você precisa enviar uma solicitação DELETE.
curl --location --request DELETE 'https://linkerfit.com/api/url/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/url/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkerfit.com/api/url/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Link has been deleted successfully"
}
https://linkerfit.com/api/pixels?limit=2&page=1
To get your pixels codes via the API, you can use this endpoint. You can also filter data (See table for more info).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://linkerfit.com/api/pixels?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/pixels?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/pixels?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"pixels": [
{
"id": 1,
"type": "gtmpixel",
"name": "GTM Pixel",
"tag": "GA-123456789",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"type": "twitterpixel",
"name": "Twitter Pixel",
"tag": "1234567",
"date": "2020-11-10 18:10:00"
}
]
}
}
https://linkerfit.com/api/pixel/add
A pixel can be created using this endpoint. You need to send the pixel type and the tag.
Parâmetro | Descrição |
---|---|
type | (required) gtmpixel | gapixel | fbpixel | adwordspixel | linkedinpixel | twitterpixel | adrollpixel | quorapixel | pinterest | bing | snapchat | reddit | tiktok |
name | (required) Custom name for your pixel |
tag | (required) The tag for the pixel |
curl --location --request POST 'https://linkerfit.com/api/pixel/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/pixel/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'type' => 'gtmpixel',
'name' => 'My GTM',
'tag' => 'GTM-ABCDE',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/pixel/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"type": "gtmpixel",
"name": "My GTM",
"tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 1
}
https://linkerfit.com/api/pixel/:id/update
To update a pixel, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Parâmetro | Descrição |
---|---|
name | (optional) Custom name for your pixel |
tag | (required) The tag for the pixel |
curl --location --request PUT 'https://linkerfit.com/api/pixel/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"name": "My GTM",
"tag": "GTM-ABCDE"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/pixel/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'name' => 'My GTM',
'tag' => 'GTM-ABCDE',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkerfit.com/api/pixel/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"name": "My GTM",
"tag": "GTM-ABCDE"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Pixel has been updated successfully."
}
https://linkerfit.com/api/pixel/:id/delete
To delete a pixel, you need to send a DELETE request.
curl --location --request DELETE 'https://linkerfit.com/api/pixel/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/pixel/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkerfit.com/api/pixel/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Pixel has been deleted successfully."
}
https://linkerfit.com/api/splash?limit=2&page=1
To get custom splash pages via the API, you can use this endpoint. You can also filter data (See table for more info).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://linkerfit.com/api/splash?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/splash?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/splash?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"splash": [
{
"id": 1,
"name": "Product 1 Promo",
"date": "2020-11-10 18:00:00"
},
{
"id": 2,
"name": "Product 2 Promo",
"date": "2020-11-10 18:10:00"
}
]
}
}
https://linkerfit.com/api/domains?limit=2&page=1
To get your branded domains via the API, you can use this endpoint. You can also filter data (See table for more info).
Parâmetro | Descrição |
---|---|
limit | (optional) Per page data result |
page | (optional) Current page request |
curl --location --request GET 'https://linkerfit.com/api/domains?limit=2&page=1' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/domains?limit=2&page=1",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "GET",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'GET',
'url': 'https://linkerfit.com/api/domains?limit=2&page=1',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": "0",
"data": {
"result": 2,
"perpage": 2,
"currentpage": 1,
"nextpage": 1,
"maxpage": 1,
"domains": [
{
"id": 1,
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
},
{
"id": 2,
"domain": "https:\/\/domain2.com",
"redirectroot": "https:\/\/rootdomain2.com",
"redirect404": "https:\/\/rootdomain2.com\/404"
}
]
}
}
https://linkerfit.com/api/domain/add
A domain can be added using this endpoint. Please make sure the domain is correctly pointed to our server.
Parâmetro | Descrição |
---|---|
domain | (required) Branded domain including http or https |
redirectroot | (optional) Root redirect when someone visits your domain |
redirect404 | (optional) Custom 404 redirect |
curl --location --request POST 'https://linkerfit.com/api/domain/add' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/domain/add",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'domain' => 'https://domain1.com',
'redirectroot' => 'https://rootdomain.com',
'redirect404' => 'https://rootdomain.com/404',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'POST',
'url': 'https://linkerfit.com/api/domain/add',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"domain": "https:\/\/domain1.com",
"redirectroot": "https:\/\/rootdomain.com",
"redirect404": "https:\/\/rootdomain.com\/404"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"id": 1
}
https://linkerfit.com/api/domain/:id/update
To update a branded domain, you need to send a valid data in JSON via a PUT request. The data must be sent as the raw body of your request as shown below. The example below shows all the parameters you can send but you are not required to send all (See table for more info).
Parâmetro | Descrição |
---|---|
redirectroot | (optional) Root redirect when someone visits your domain |
redirect404 | (optional) Custom 404 redirect |
curl --location --request PUT 'https://linkerfit.com/api/domain/:id/update' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
--data-raw '{
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}'
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/domain/:id/update",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "PUT",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
CURLOPT_POSTFIELDS => json_encode(array (
'redirectroot' => 'https://rootdomain-new.com',
'redirect404' => 'https://rootdomain-new.com/404',
)),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'PUT',
'url': 'https://linkerfit.com/api/domain/:id/update',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
body: JSON.stringify({
"redirectroot": "https:\/\/rootdomain-new.com",
"redirect404": "https:\/\/rootdomain-new.com\/404"
}),
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Domain has been updated successfully."
}
https://linkerfit.com/api/domain/:id/delete
To delete a domain, you need to send a DELETE request.
curl --location --request DELETE 'https://linkerfit.com/api/domain/:id/delete' \
--header 'Authorization: Bearer YOURAPIKEY' \
--header 'Content-Type: application/json' \
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_URL => "https://linkerfit.com/api/domain/:id/delete",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 2,
CURLOPT_TIMEOUT => 10,
CURLOPT_FOLLOWLOCATION => true,
CURLOPT_CUSTOMREQUEST => "DELETE",
CURLOPT_HTTPHEADER => array(
"Authorization: Bearer YOURAPIKEY",
"Content-Type: application/json",
),
));
$response = curl_exec($curl);
curl_close($curl);
echo $response;
var request = require('request');
var options = {
'method': 'DELETE',
'url': 'https://linkerfit.com/api/domain/:id/delete',
'headers': {
'Authorization': 'Bearer YOURAPIKEY',
'Content-Type': 'application/json'
},
};
request(options, function (error, response) {
if (error) throw new Error(error);
console.log(response.body);
});
{
"error": 0,
"message": "Domain has been deleted successfully."
}